Reflective Road & Pavement Marking Tape by hiphen

Reflective Road & Pavement Marking Tape by hiphen

Product Description

Reflective Road & Pavement Marking Tape

Product features
SUPERIOR ADHESIVE – maintains a secure bond to properly prepared surfaces rain or shine.
LARGE GLASS BEAD REFLEICTIVE SURFACE – Designed to provide improved visibility for low light and nighttime conditions.
EASY TO INSTALL – And with no paper liner to discard. No dry time, cure time, fumes or paint clean up.
HIGH WAY, STREET ROADS, HOME OR SHOP – Perfect for small and large Road Marking projects. Add lines or make repairs quickly. Basketball key, parking spaces or outline steps.
VISUAL ORGANIZATION – Perfect material for Dashed lines, L shapes and T shapes. Highlight area for bins, carts or to promote visual safety.

Specification:

Color: White
Standard Width: 15 cm
Standard Length: 33m
Thickness: 1.5mm
Coefficient of Retro-Reflection: 250
mcd·lx-1m-2
Abrasive Resistance: 30mg
Cohesiveness: 16N/25mm
Skid Resistance Value: 45BPN
Using Time: 2 years
Ability: Water Resistance, Alkali-
Resistant

Product description

Economical, Highly Visible, Heavy Aluminum Foil Base Retro-Reflective Indoor-Outdoor Marking Tape suitable for marking highway roads, warehouse, driveway, street, steps, sidewalks or anywhere durable markings are required. Create L shapes and T shapes to outline parking places for cars or create a box area to show where to place bins.
A superior adhesive ensures this tape maintains a secure bond to asphalt and concrete surfaces through any climate. Thicker material for longer life in permanent applications. This product is used by the City of Portland Oregon to mark downtown parking.
Conformable foil base and reflective glass bead surface reflects headlights even in wet conditions.
Simple and easy adhesive installation with no paper liner to discard.
No dry time, cure time, fumes or paint clean up.

This highly-reflective permanent pavement marking tape will resist fading, chipping and peeling much better than painted lines.
Use a pressure washer or stiff broom with soap and water to clean the surface. Smoother is better. If the surface is very textured or porous a primer must be used to aid bonding. Always test a small area before completing the project. If it does not stick well then the surface preparation is incomplete. The edges can be sharp. Use gloves to apply by hand for marking of dry pavement parking areas. Roll a weight or vehicle down the line to conform to the surface of the road. A small roller or rubber mallet will help ensure the surface bond. The tape must be completely pressed into the surface edge to edge.
You can drive on our tape immediately after you apply to the surface. Great for back up lines to aid parking of RV or boats. Good for marking uneven sidewalk hazards. Often used in a warehouse environments to add highly visible permanent lane marking and area organization.

WE CAN SUPPLY AND INSTALL IN ANYWHERE IN NIGERIA

OFFICES IN LAGOS, ABUJA, PORT HARCOURT AND BENIN CITY

Please CALL/WHATSAPP: 0703-514-6988, 0807-779-7562,0802-589-7223, 0818-116-0990

Email: info (AT) hiphensolutions.com

Web: www.hiphensolutions.com/products

We are Multi-Award Winning company in Technology Solutions,Access Control, Safety, Security and Automation Systems